The BP-LF690 is a back pressure regulator for gas or liquid applications suited for typical low flow applications to 10lpm (liquid), this accurate regulator controls inlet pressure and vents excess pressure back via the threaded ¼” NPT outlet port. FEATURES 690 bar/10000 psi inlet pressure Metal to metal seating for liquid and PEEK seating for Gas Precision machined sensing elements 3 Sensor ranges for combination of low torqu

An economical heated regulator available in ‘side entry’ or ‘in-line’ heat transfer options to maintain sample gases in their vapour state. The ‘in-line’ design maximizes the heat transfer area via a unique spiral machined heater sheath, which mixes the gas and ensures efficient heat transfer. The ‘side entry’ design can be used in applications where heat transfer is less critical, and where install

FEATURES 316L SS Machined Wetted Parts Large sensitive elastomeric diaphragm 0,1 bar to 10 bar / 1,5 psi to 150 psi control range Minimal decaying inlet pressure effect For flow rates to 30Nm³/hr (@ max P2)

The TS-300 provides stable pressure control under decaying cylinder pressures. The first stage of the regulator is set to 35 bar to allow maximum flow capability through the regulator. SPECIAL FEATURES Metal to metal sealing diaphragm Sealing area protected and centralized within the body of the regulator 0,04 % decaying pressure effect ‘Interstage’ relief valve option

Based on the same design features of the LF-690 Hydraulic Regulator, the LF-692 incorporates a PEEK seat for use on high pressure gases, using a range of precision machined sensing elements to provide control of pressure to 690 bar. The regulator is self relieving with segregated captured vent to allow vented gases to be piped away to a safe area. The seating area can easily be accessed from the base of the regulator for speedy servicing in situ.

The BP-300 has been designed with a convoluted Inconel X750 diaphragm that lasts 50 % longer than a typical stainless steel designs. Its compact simple design makes it ideal for general purpose applications, where accurate control of upstream pressure is required. FEATURES Metal to metal diaphragm sealing Positive sealing against Viton seat Lightweight compact design Strong and sensitive diaphragm element High Accuracy

The BP-MF690 is a back pressure regulator for gas or liquid applications suited for typical low flow applications to xx lpm (liquid). The liquid version includes ceramic seating for ultimate protection against cavitation and erosion on aggressive application media such as water glycol and methanol. This accurate regulator controls inlet pressure and vents excess pressure back via the threaded ¾” NPT outlet port. FEATURES Inlet co

The LF-300 has been designed with quality and reliability in mind, with genuinely unique features designed into this single stage regulator. Finite Element Analysis, combined with physical cycle tests, created an Inconel X750 diaphragm that lasts 50 % longer than a typical stainless steel designs.The metal diaphragm means that leak integrity is maintained, and that no sample media is absorbed by the sensing element – reducing purge times be

The LF-690 uses Ceramic Seating to provide ultimate protection against the harsh service encountered on hydraulic services. The unique seating cartridge provides a dampening action on this critical component to prevent ‘chattering’ or ‘unstable frequency resonance’. The regulator is self relieving with segregated captured vent to prevent deterioration to the loading mechanism and making the regulator cleaner to service. Th

The MF-414 is a medium flow piston sensed pressure reducing regulator, which incorporates a balanced main valve to provide stable control under varying inlet pressures. The regulator has the option of a PEEK seat for gas service, or 17-4SS for hydraulic service. Both designs have a segregated captured vent to allow pressure reduction of the outlet pressure through a ¼ NPT port on the side of the regulator body. FEATURES 414 bar / 6000